Ed ecco spuntare il primo OTA Jelly Bean per Samsung Galaxy Tab 2 da 7″, l’OTA può essere flashato solo sulla build P3100DDBLH3, quindi fate ben attenzione a quello che fate.

Instructions for flashing the OTA Update:

• –  Make a backup of your data
• – Download the Base firmware required by the OTA Update, P3100DDBLH3  – Get it from HERE
• –  Unzip the file
• –  Open Odin 3.04 (Download it from HERE)
•  – Restart the device into download mode (Press Home Button + Power Button + Volume down)
• –  Connect phone and wait until you get a yellow/blue sign in Odin
• –  Add P3100DDBLH3_P3100ODDBLH1_P3100DDLG1_HOME.tar.md5 to PDA
• –  Make sure re-partition is NOT ticked
• –  Start flash, sit back and wait a few minutes
• –  Download the P3100DDBLI1 OTA Update (Download it from HERE)
• –  Copy the OTA update to your External SD Card
• –  Restart the device into Recovery Mode (Press Power Button + Volume up)
• –  Select Apply update from External Storage
• –  Browse to the OTA update and flash it
• –  When OTA update is flashed perform “Wipe Data/Factory Restore” (Will format your internal SD Card)
• –  Reboot your device and Voila!

• Published by FaryaabS

FONTE